4 Classification
The classification given in ISO 20957-1 shall apply.
5 Safety requirements
5.1 General
Depending on the design of the piece of equipment,the following requirements shall apply as appropriate.
5.2 External construction
5.3 Squeeze, shear and reciprocating points within the accessible area
The squeeze,shear and reciprocating points within the accessible area shall be in accordance with ISO 20957-1
5.3.1 Transmission elements and rotating parts
Transmission elements,fans and flywheels shall be in accordance with ISO 20957-1.
5.3.2 Temperature rise of accessible surfaces
Accessible surfaces of the rowing equipment shall have a temperature of 65 degree. Test in accordance with 6.3
5.2.4 Seat
The seat shall not derail when a load of >100 N is applied to the seat in all directions. Test in accordance with 6.2
5.3 Intrinsic loading
The rowing equipment shall withstand a load of 2,5 times the maximum user's body mass of+/_5 % as specified by the manufacturer or 2 500 N,whichever is greater. After the test,the rowing equipment sha1l not be broken and shall still function as intended by the manufacturer. Test in accordance with 6.4
5.4 Handles
In rowing equipment where the handle is connected to the rowing equipment by a flexible member (rope,belt or chain) the mass of the handle without a flexible member shall be less than 600 g.
The range of movement of the handle shall be more than 1600 mm measured from the center line of the foot rest to the center of the handle. Test in accordance with 6.1.5
5.5 Load of ropes,belts,chains and their attachment components
Rowing equipment using ropes,belts,chains and attachment components (e. g. snap links,shackles, carabineers, clamps or similar) shall withstand a static load of six times (350 士 5) N. Test in accordance with 6.1.6
5.6 Foot strap
Provisions shall be made for fastening the foot (foot straps). For classes S and I,the foot support or foot strap shall be adjustable for different foot sizes.
Test in accordance with 6.1.4
Each foot strap shall withstand a pull force of great than 500 N perpendicular to the foot support. After the test,the rowing equipment shall not be broken and shall still function as intended by the manufacturer. Test in accordance with 6.5
5.7 Foot support
Each foot support shall withstand a push force of great then 1000 N perpendicular to the foot support.
After the test,the training equipment shall not be broken and shall still function as intended by the manufacturer. Test in accordance with 6.6
5.8 Endurance
The rowing equipment shall withstand 12, 000 cycles for class H,and 100,000 cycles for classes S and I, while loaded with the maximum body weight specified by the manufacturer or 100 kg whichever is greater and with the maximum resistance applied. After the test,the rowing equipment shall not be broken and shall still function as intended by the Manufacturer. Test in accordance with 6.7
5.9 Stability
The rowing equipment shall not tip over. Test in accordance with 6.8
5.10 Additional requirements for class A
For values greater than 50 W,the accuracy of the power display shall be within the tolerance of +/_ 10 % and for values of <50 W,the accuracy of the power display shall be within the tolerance of 士5 W. Test in accordance with 6.9
5.11 Additional instructions for use
In addition to the general instructions for use according to ISO 20957-1,at least the following information shall be given,depending on the class:
a)for class A,testing parameters: training speed,resistance setting and range of movement;
b)handling and storage.
6. Test methods
6.1 General
6.1.1 Dimensional check
The measurement shall be done with appropriate measurement devices.
6.1.2 Visual examination
The visual examination shall be done under proper lighting.
6.1.3 Tactile examination
The tactile examination shall be done without gloves.
6.1.4 Performance test
The tested mechanism shall be actuated as intended by the manufacture r.
6.1.5 Weighing test
The measurement of the weight shall be done with appropriate measurement devices.
6.1.6 Load test of ropes,belts,chains and attachment components.
Pull out the rope,belt or chain (80 +/_ 10) % of the range of motion and clamp it. Apply the test load to the handles to load the ropes,belts,chains and attachment components between clamp and handles.
6.2 Testing of seat
Apply the load in accordance with 5.2.4 for more than 1 minute, Check whether the seat always remains attached to the rail.
6.3 Testing of temperature rise
Measure the temperature with an accuracy of +/- 1 degree.
Operate the rowing equipment for (20 士 1) minutes with the following values:
- frequency of 30 /min
- ( 60~65) % of the maximum range of motion of the hand grip; at maximum resistance for the rowing equipment.
Within 10 seconds after the test,measure the temperature of all exposed surfaces.
6.4 Testing of intrinsic loading
Place the rowing equipment freely on a flat floor and clamp the seat in the most onerous position along the rail.
Apply the test force specified in 5.3 to the centre of the seat using a (300+/-5) mm x (300+/- 5) mm plate for at least 2 minutes. The equipment shall not be fixed to the floor during the test.
6.5 Testing of foot strap
Apply the test force specified in 5.6 at the centre of the foot-strap using (80 士 5) mm wide belt for a period of (2 士 1) min
6.6 Testing of foot support
Apply the test force specified in 5.7 to the foot support by using the test device according to Figure 3 for (2 士 1) min
6.7 Endurance testing
Perform the endurance test for the number of cycles specified in 5.8 with the following values:
- frequency of 30/minute
- 85%~95% of the maximum range of the motion of the seat.
The endurance test may be performed continuously or in intervals of at least 5 % of the required test cycles. Each interval may be followed by a cool down period.
6.8 Testing of stability
Carry out the test according to the stability test in ISO 20957-1.
6.9 Testing of additional requirements for class A, check more...
Kommentare